; K-Factor Test ; ; Created: Wed Dec 06 2017 10:35:34 GMT+0100 (Hora estándar romance) ; Settings: ; Filament Diameter = 1.75 ; Nozzle Diameter = 0.4 ; Nozzle Temperature = 210 ; Nozzle / Line Ratio = 1.05 ; Bed Temperature = 0 ; Slow Printing Speed = 2400 ; Fast Printing Speed = 4500 ; Movement Speed = 6600 ; Use UBL = false ; Retraction Distance = 1 ; Bed Size X = 190 ; Bed Size Y = 190 ; Layer Height = 0.3 ; Extrusion Multiplier = 0.92 ; Starting Value K-Factor = 0 ; Ending value K-Factor = 100 ; K-Factor Stepping = 5 ; G28 ; home all axes M190 S0 ; set and wait for bed temp M104 S210 ; set nozzle temp and continue M109 S210 ; block waiting for nozzle temp G21 ; set units to millimetres M204 S500 ; lower acceleration to 500mm/s2 during the test G90 ; use absolute coordinates M83 ; use relative distances for extrusion ; ; go to layer height and prime nozzle on a line to the left ; G1 X35 Y32.5 F6600 G1 Z0.3 F2400 G1 X35 Y132.5 E10 F2400 ; extrude some to start clean G1 E-1 ; ; start the test (all values are relative coordinates) ; G1 X55 Y32.5 F6600 ; move to pattern start G91 ; use relative coordinates M900 K0 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K5 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K10 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K15 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K20 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K25 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K30 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K35 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K40 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K45 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K50 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K55 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K60 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K65 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K70 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K75 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K80 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K85 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K90 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K95 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 M900 K100 ; set K-factor G1 E1 G1 X20 Y0 E0.96388 F2400 G1 X40 Y0 E1.92776 F4500 G1 X20 Y0 E0.96388 F2400 G1 E-1 G1 X-80 Y5 F6600 ; ; mark the test area for reference ; G1 X20 Y0 F6600 G1 E1 G1 X0 Y20 E0.96388 F2400 G1 E-1 G1 X40 Y-20 F6600 G1 E1 G1 X0 Y20 E0.96388 F2400 G1 E-1 ; ; finish ; G4 ; wait M104 S0 ; turn off hotend M140 S0 ; turn off bed G90 ; use absolute coordinates G1 Z30 Y200 F6600 ; move away from the print M84 ; disable motors M502 ; resets parameters from ROM (for those who do not have an EEPROM) M501 ; resets parameters from EEPROM (preferably) ;